Contractors · Installation Companies · PMC · Architects

Who Is Responsible for Fire Safety on a Project?
Dividing Responsibility Among Consultant, Contractor, Architect, and Authorities

✍ Saar Udi, Fire Safety Consultant 📅 June 2026 ⏱ Reading time: approx. 6 minutes

The Question Nobody Wants to Ask — Until There Is a Problem

On projects involving multiple professional stakeholders — architect, general contractor, systems installation company, project manager — the question of fire safety responsibility usually sounds simple. "Everyone is responsible for their own part," everyone says. And that is precisely why things keep falling through the cracks.

Not out of negligence — out of assumption. Each party assumes someone else has already taken care of it. The architect assumes the contractor knows the requirements. The contractor assumes the architect has embedded them in the design. The installation company assumes the specification is complete and accurate. And everyone assumes the Fire Authority will flag anything that is missing.

The result: projects that reach the submission stage — or worse, the construction stage — with critical gaps still open.

The Four Project Parties — and What Each Is Responsible For

The Architect

  • Integrating safety requirements into the design
  • Positioning detectors, hydrants, emergency exits
  • Submitting plans to the Authority for approval
  • Coordinating with systems designers

The Installation Company

  • Executing systems per the specification received
  • Compliance with professional standards
  • System acceptance testing
  • As-built documentation

General Contractor / Developer

  • Coordinating all trades
  • Schedules and work sequencing
  • Overall responsibility for project progress
  • Submitting documents for occupancy permit (Form 4)

Fire Authority

  • Reviewing plans and issuing approvals
  • Inspections at defined construction milestones
  • Issuing business license / occupancy permit
  • Enforcement and oversight

Each of these parties carries out their own scope — but none of them, individually, is obligated to see the complete picture. The architect focuses on design. The installation company focuses on execution. The contractor manages schedule and budget. And the Fire Authority reviews plans at fixed milestones — it is not present throughout the entire process.

What Falls Through the Cracks — The Most Common Gaps

I don't ask "which systems are mandatory?" I ask "what does this building actually need?" — Saar Udi, Fire Safety Consultant

The Role of the Independent Consultant: The Mechanism That Closes the Gaps

An independent fire safety consultant does not replace any of the parties described above — they complement them. The architect continues to design. The installation company continues to execute. The contractor continues to manage. But there is now one party who sees everything the others see — and what lies between them.

In practice, this means: advisory from the initial design phase, before specifications are built; coordination between the architect and installation companies on system interfaces; ongoing liaison with the Israel Fire and Rescue Authority throughout all construction stages; and verification that what was designed and what was built actually match.

When responsibility for this coordination is not clearly defined in the project contract — it does not exist. And then, when something is wrong, everyone is right that one of the others should have taken care of it.

A Field Lesson: What I Saw Working at the Fire Authority

During the seven years I worked at the Israel Fire and Rescue Authority — both as an enforcement inspector and as a plan reviewer for building permits — I saw the problem from the other side of the table. Plans that arrived at the Authority with critical deficiencies did not arrive that way because people were ignorant. They arrived that way because nobody on the project side had consolidated the topic from the outset.

When an architect submits a plan to the Authority, they expect to receive approval or comments. But what the Authority sees is a single moment in time — it does not know the history of decisions made before it. Every question that was not asked during the design phase becomes a problem at the submission stage — and a costly delay at the construction stage.

The simple lesson: the earlier an independent consultant enters, the fewer surprises with the Authority. Not because the Authority favors them — but because they already know what the Authority will ask.

The big moments are not the fires that happened. They are the fires that did not happen. — Saar Udi, Fire Safety Consultant

Frequently Asked Questions

Who is responsible for fire safety on a construction project — the architect, the contractor, or the consultant?

Each party is responsible for their own scope: the architect — for integrating safety requirements into the design; the installation company — for correct execution of the systems; the general contractor — for coordinating between trades. But without an independent fire safety consultant who consolidates everything and is defined in the contract as the coordination point, gaps emerge between the parties — often only when they are already expensive to fix.

What is the difference between the fire safety consultant's responsibility and the contractor's?

The contractor is responsible for execution — installing correctly according to the specification they received. The consultant is responsible for the professional soundness of the specification itself — whether the planned systems are appropriate for the building's specific risk profile, its use, and its occupant population. These are two entirely different responsibilities that cannot be folded into one another.

When should an independent fire safety consultant be brought into a project?

As early as possible — ideally during the initial design phase, before the specification is written. The later the consultant enters, the higher the risk that requirements are discovered only during construction, triggering costly design changes, delays, and sometimes disputes between parties over who bears the cost.

Does the Fire Authority replace an independent fire safety consultant?

No. The Israel Fire and Rescue Authority reviews plans at fixed milestones and issues approvals — it does not replace ongoing professional advisory. The Authority sees the project only at defined stages. An independent consultant accompanies the project throughout the entire process — from design, through submission, and through to final approvals.

Want to ensure all project parties are properly coordinated?

Saar Udi provides independent fire safety consulting for complex projects — from design through occupancy.
To get in touch and arrange an initial consultation:

saarsafety.co.il
SU

Saar Udi — Senior Fire Safety Consultant

Over 20 years in fire safety consulting. Seven years working at the Israel Fire and Rescue Authority — both as an enforcement inspector and as a plan reviewer for building permits — providing a unique understanding of both sides of the process. Background in architecture. Former principal consultant to Mashkit (exclusive three-year contract). Co-founder of an association for advancing fire safety in Israel.
saarsafety.co.il