When to Bring a Fire Safety Consultant Into Your Project — A Guide to Project Phases
The question "when should we bring a fire safety consultant into the project?" comes up in every initial briefing. The right answer determines not just cost — but the feasibility of the entire solution.
The Question Architects Ask — and Why the Answer Matters More Than It Seems
At a new project kick-off meeting, the agenda is packed: architect, structural engineer, electrical consultant, HVAC consultant. Fire safety? "We'll bring that in when we get to the permitting phase."
That is the moment the problem begins. Not out of bad intentions — but because most professionals have never seen what happens on the other side of the Authority's table. There, a file that arrives without early fire safety coordination is recognized immediately: the enclosures don't match the detector layout, the evacuation stairwell is narrower than permitted, and the compressor room was sealed with a solution that has to be reopened.
When to bring a fire safety consultant into a project is not a technical question. It is a risk management question.
Three Project Phases — and What a Fire Safety Consultant Does in Each
Initial Design
Evacuation core placement, travel distances, fire compartment zoning — all defined while they are still on paper. The building is designed around fire safety, not the other way around.
Permitting Phase
Corrections are still possible — but many solutions are already locked in. The consultant coordinates with the Israel Fire and Rescue Authority, identifies gaps, and assists in completing the submission documents. Changes at this stage may require drawing revisions.
Construction Phase
The consultant coordinates system contractors (suppression, alarm, pressurization), verifies that construction matches approved drawings, and oversees the final inspection. Every change at this point is real field work.
The three phases are not equal. A consultant's value is not uniform across the project — it diminishes as drawings turn into concrete.
What Happens When the Consultant Comes In Early
Early engagement allows the building to be designed so that fire safety is not an added layer — it is part of the layer. Several things happen:
Early Engagement — What You Gain
- Evacuation core routes designed correctly from the start
- No surprises at the Israel Fire and Rescue Authority submission
- Suppression and alarm systems integrated into the overall design
- Early coordination accelerates approvals
- Changes are inexpensive because they are still on paper
Late Engagement — What You Pay
- Redesign of evacuation routes already finalized
- System contractors entering an unprepared site
- Resubmissions to the Israel Fire and Rescue Authority
- Compressed solutions: systems forced into spaces never designed for them
- Delays to the overall project timeline
Two Towers Over 42 Meters — Early Engagement
In a residential project in Netivot comprising two towers exceeding 42 meters in height, Saar Udi's fire safety consulting was integrated from the initial design phase. The result: Israel Fire and Rescue Authority approval within two months. Not by luck — because the file arrived complete, coordinated, and free of contradictions requiring resolution.
"I come in at the stage when it is still possible to design the building around fire safety — not to compress it inside afterwards."— Saar Udi, Senior Fire Safety Consultant
What Happens When the Consultant Comes In Late
Construction is a process of cumulative decisions. Each decision that is locked in narrows the space for the next change. When a fire safety consultant arrives after drawings have been submitted, he finds himself not designing — but correcting.
A project that arrives at the Israel Fire and Rescue Authority without early coordination is often caught on the most basic questions: where is the wet riser? How is the sprinkler coordinated with the concrete beams? Who approved the paint store location?
Every unanswered question carries a cost — in time, in resubmission, and sometimes in a physical change that has already been cast into the wall.
Industrial Facility — Full Lifecycle Consulting
The Caesarea gypsum manufacturing plant is an example of a project where fire safety systems cannot be separated from the industrial process. Consulting spanned four years of the project (2022–2026) — design, approvals, construction, and inter-system integration. When complexity is high, there is no "alternative entry point" — engagement must be continuous.
Lessons from the Field: What I Saw from the Authority's Side
Seven years working in the Fire Protection Division of the Israel Fire and Rescue Authority — in an inspection and enforcement role reviewing building permit applications — provide a perspective that is difficult to acquire any other way.
The projects that were delayed were not always the bad projects. Sometimes they were large, complex, and expensive — but entered the Authority's process without anyone sitting down beforehand to coordinate requirements. So they came back again and again with questions that could have been resolved in three conversations during the design phase.
I saw files that came back six times. I saw buildings constructed without the correct vertical shaft for the suppression pipe. I saw evacuation staircases running through rooms added during construction. None of this was negligence — it was the product of a project that did not include the right people at the right time.
"The great moments are not the fire that happened. They are the fire that didn't."— Saar Udi
My architectural background adds a dimension: when I look at a plan, I see space — not just equipment. I understand where the occupant walks, what they see, where they run under stress. That changed the way I give advice — from checklists of requirements to spatial solutions that actually work.
Frequently Asked Questions
When should a fire safety consultant be brought into a construction project?
Is a fire safety consultant only required for large buildings?
What is the difference between engaging a consultant at the design stage versus the permitting stage?
Does a fire safety consultant shorten the building permit process?
How much does a fire safety consultant cost and what does the service include?
Want to Know When to Bring a Consultant Into Your Project?
A short consulting call saves months of delays. Contact Saar Udi with your project details.
Contact & Details → saarsafety.co.il